MURALO LOW VOC* ENAMEL UNDERCOATER PRIMER & SEALER
This fast drying, low odor* primer & sealer is highly recommended for use on all new or old interior surfaces and previously painted exterior surfaces in sound condition. Its super adhesion plus its uniform holdout and easy application make 563 technically superior to most interior latex primers. It’s especially effective on porous and uneven substrates such as drywall, tape joints, plaster and plastered spots. 563 is suitable for use under oil, alkyd or latex topcoats.
AllWall & Trim Primer, Sealer & Undercoater
FixALL AllWall and Trim Primer is a quick drying interior primer-sealer and under coater for unpainted walls, trim and ceilings that may be porous or absorbent. This product is an excellent base-coat for alkyd, or latex finish coats. It’s ideal for large areas of sheet rock or wallboard where a primer and finish coat will be applied in one day.
Stain & Odor Barrier Primer
A premium solvent-free odor primer/sealant and stain blocker designed to eliminate malodors on multiple surfaces and block tough stains. FixALL Stain and Odor Barrier is water-based and does not contain flammable solvents, like alcohol, historically present in products that kill odors and stains.
Unlike typical water-based coatings that “wick” smoke odors and stains to the surface, FixALL Stain and Odor Barrier, with its unique proprietary OdorLock Plus technology, wicks malodors into the coating, but locks odors in rather than bringing them to the surface. The cured film provides a permanent barrier to future vapor release, but will not trap moisture. This is the only multi-phase technology that reduces odor immediately on application and restricts future odor release from the sealed surface. It provides one coat odor control even with seasonal changes in temperature and humidity.
FixALL Stain and Odor Barrier is your final step to rid any property of smoke, pet and cooking odors, as well as residual stains caused by smoke, nicotine, grease and ink.
Stopz Mold Resistant Interior and Exterior Primer/Finish
Stopz Mold & Mildew Resistant*, All Purpose, Primer/Finish is an extremely effective 100% acrylic, water-based primer for use on most interior and exterior surfaces. It is also effective for interior finishes in areas susceptible to mold and mildew growth.
PVA Drywall Primer
FixALL PVA Drywall Primer is a waterborne interior primer intended for both commercial and residential use. This rapid drying, high hiding primer meets the high production requirements of professionals and makes a good first coat for surfaces that are porous or absorbent. This product can be brushed, rolled or spray applied.
GripCoat Bonding Primer
GripCoat Bonding Primer (previously Grabber Bonding Primer) is a water-based, urethane modified, acrylic primer-sealer with excellent adhesion to a wide variety of surfaces that usually present difficult adhesion problems. Although it is recommended that a test-patch be applied before proceeding, since there is such a wide variety of surfaces, PVC, other plastics, glass, fiberglass, glossy paints, tile or glazed block, galvanized metal, aluminum, copper, lead and tin can usually be successfully primed with this product. This product is suitable for interior or exterior exposures. It must be top-coated with latex, alkyd, urethane or waterborne epoxy topcoats.
Ultimate Universal Primer
FixALL Universal Primer F506xx is a quick drying, high performance, 100% acrylic latex, Universal primer that provides exceptional adhesion and light stain blocking properties. This application- friendly product may be used on both interior and exterior surfaces to seal all types of substrates. This high hiding, easy applying primer is appropriate for a wide range of applications.
Stopz Mold Resistant Waterproofer
Stopz® is a mold and mildew resistant* waterproofing paint designed to waterproof bare masonry and hold back 10 psi of hydrostatic pressure. This product will work either above or below grade. Stopz is an acrylic, fast drying formula that works by penetrating the concrete and expanding deeply into the pores of the masonry to waterproof and reduce radon emissions. Stopz is easily applied with a brush and/or roller.
Clear Waterproofing Sealer
Clear Waterproofing Sealer is a transparent sealer that penetrates the surface of dry, porous materials to help prevent moisture penetration and water damage. This can be used on wood, concrete, brick, masonry, canvas, stucco and other substrates. It dries clear and allows the surface to age naturally. This product will protect against salt water. For new construction, prevent weathering and water damage by applying Clear Waterproofing Sealer immediately after installation.
Shop Coat Primer
FixALL Shop Coat Metal Primer is designed for field or shop priming of fabricated steel exposed to light to moderate atmospheric exposures. It provides good penetration and wetting properties necessary for bonding to hand and power tool cleaned surfaces. FixALL Shop Coat Metal Primer is also suitable for production line application. It may be top-coated with either water based or solvent based paints. FixALL Shop Coat Metal Primer is lead and chromate free.
